User's Manual

TURNING ON/OFF THE GROUND STATION

When powering on the Ground Station, be sure to provide at least 3 to 6 ft (1 to 2m) of space between the Ground Station

and the aircraft. (If the Ground Station and aircraft are too close together the system may not properly connect.)

Short press and long press the power switch until the Ground Station screens turn on (this double press procedure

prevents accidental power ups). While the Ground Station is initializing, power on the aircraft battery, i t is important to

power on the Ground Station rst and the aircraft second, in that specic order, to achieve a proper RC connection.

TURNING ON THE GROUND STATION

TURNING OFF THE GROUND STATION

1. Short and Long Press Power Button

2. Blue Light Indicates

3. Device Power On

1. Long Press Power Button

2. Tap OK when the Power Off

dialog pops up

3. Blue LED light will go off

Ground Station LED indicator

You can also set the Ground Station Sleep Mode under the following path: PILOT > SYSTEM SETTINGS > SLEEP

MODE (20 mins by default)