Instructions / Assembly

DO NOT RETURN TO RETAILER YOU PURCHASED AT.
CONTACT XDP FOR PARTS AND SUPPORT AT 1.866.884.0535 or [e-mail]
25
STEP 11 - Trapeze Assembly
 Insert S1 (which is pre-assembled with P1) through the hole on A2.
 Secure using S3 and P4 as shown in the diagram below.
NOTE:
1. Do not over-tighten the nuts and bolts at every step.
2. Do not snap in the cover of plastic cap until you have finished the assembly of
each step and went back to tighten all of the nuts and bolts.
S1
P1
S3
S3
P4
A2
P4
S1