Installation Instructions
43
DO NOT RETURN TO RETAILER WHERE PURCHASED.
CONTACT XDP FOR PARTS AND SUPPORT AT 1.866.884.0535 or service@xdp-recreation.com
STEP 23 - See-Saw assembly (continued)
Secure U16 to U19-1 and U19-2 using U7, U8 and U6 as shown below.
Repeat for the other side.
NOTE:
1. Do not over-tighten the nuts and bolts at every step.
2. Do not snap in the cover of plastic cap until you have finished the assembly of
each step and went back to tighten all of the nuts and bolts.
Note: Make sure to go back to check all hardware and securely tighten all
bolts and nuts before using the playground equipment.
U8
U6
U16
U7
U19-1
U19-2