User Manual

Accessories

The above limited warranty in Section 8.1 only extends to the X PlusOne unit accompanying this Manual and does not

extend to the radio controller, camera or any other accessory sold or provided with the X PlusOne (if applicable). The

radio controller, camera and any other accessories sold or provided with the X PlusOne (if applicable) each have separate

manuals or documentation that may or may not include warranties for such accessory. Any representations or warranties

provided for in those manuals or any associated documentation are not representations or warranties made by XCraft, and

in no case shall any such representations or warranties extend to XCraft or the X PlusOne.

Limitation of Liability

XCraft’s total maximum aggregate liability for damages relating to the sale and operation of the X PlusOne product shall

not exceed the purchase price paid for the product. In no event shall XCraft be liable for, and purchaser and all operators

of the product waive and release any claim (in contract, tort, breach of statutory duty or otherwise) against XCraft for, any

and all indirect, special incidental or consequential damages as well as any and all lost revenues, profits or prospective

economic or non-economic advantage (whether direct or indirect).

Indemnification

Purchaser and each operator hereby agrees to indemnify, save and hold XCraft and its officers, directors, shareholders,

agents, and employees harmless from any and all damages, injuries or any other loss which is caused by the acts or

omissions of purchaser or any operator of the X PlusOne, regardless of whether based upon negligence, strict liability in

tort, breach of warranty or other theory of recovery or any other cause of action.

Software

The software included in this X PlusOne unit contains copyrighted software that is licensed in its entirety under the GPLv3.

You may obtain the complete Corresponding Source Code for the software from XCraft for a period of three years after the

last shipment of this product and/or spare parts therefore, which will be no earlier than 2015-11-19, on XCraft Enterprise’s

website at http://xcraft.io. The licensed software contained herein was modified by XCraft Enterprises, LLC on 2015-10-

15. Future updates to the Corresponding Source Code will be provided on XCraft Enterprise’s website with corresponding

installation information. NOTWITHSTANDING THE FOREGOING, ANY MODIFICATION OF THE SOFTWARE

INCLUDED IN THIS X PLUSONE BY PURCHASER OR ANYONE OTHER THAN XCRAFT WILL EFFECTIVELY VOID

ANY AND ALL WARRANTIES CONTAINED HEREIN.

Additional Terms

These terms represent the entire understanding between XCraft and the purchaser and operators of the X PlusOne

product. In the event any provision of these terms is determined to be illegal or unenforceable, that provision will be

limited or eliminated to the minimum extent necessary so that the remaining terms and conditions shall otherwise remain

in full force and effect. The purchaser and operators agree that any legal action taken in relation to the product shall be

governed by and construed in accordance with the laws of the State of Idaho, without regard to the conflict of laws

provisions thereof. The exclusive jurisdiction and venue for any legal proceedings or actions will be the State of Idaho and

the U.S. federal courts located in Coeur d’Alene, Idaho. The United Nations Convention on Contracts for the International

Sale of Goods (CISG) is specifically excluded and do not apply to this this Agreement nor the sale of this X PlusOne unit.