Quick start Guide

3. Propellers
The wings silver spinners spin clockwise and the pylons black spinners spin counter-clockwise.
a) Unscrew the spinner and place the 10x5 props on the main wing motors, and the 10x5R on the pylon motors.
b) Tighten the spinner by holding the motor still and spinning the spinner into place. Tighten firmly with fingers.
*Check that the propellers are secure before each flight.
4. Plugging in the Battery
a) Install the battery by connecting the matching yellow ends of both power cables.
b) Fold the wires underneath the battery and install as shown.
*the battery balance cable is left loose.
c) Cover the battery and all wires with the battery cover.
Recommended first calibration
You should calibrate your X PlusOne every time you fly in a new location. Use Mission Planner software (Windows), or
QGroundControl (iOS/Windows) to calibrate, set modes, or set way points for your X PlusOne.
*
For more information, see the Operation Manual.
*Always fly at locations that are clear of building and other obstacles.
*DO NOT fly above or near large crowds.
*Avoid flying at altitudes above 400 ft.
*Be very careful when flying 19,600 ft. or more above sea level.
*Fly in moderate weather conditions with temperatures between 32° F to 104° F.
power cable
battery