User Manual

3
Operation
Installing Batteries
1. Locate the battery compartment on the back of the Presenter.
2. Slide open and remove the battery compartment door.
3. Remove old batteries if present.
4. Insert two fresh AAA batteries in the orientation indicated by the illustration within the
compartment.
5. Slide the battery compartment door back into place to close it. You may hear a slight
click, indicating the door has been securely closed.
When replacing batteries, replace both at the same time. Do not mix types or
brands or use old and new batteries together. This could damage the device.
Using the Presenter
1. Remove the USB receiver from the bottom front of the Presenter by inserting your
fingernail into the lip and nudging it out.
2. Plug the USB receiver into a powered USB port on your computer. Your computer may
indicate that new hardware has been installed.
3. On your computer, open a presentation using your chosen presentation software.
Refer to the Overview on pages 2-3 for information on the functions of the individual
buttons.