User Manual
Thank you for choosing Xcellon. The Xcellon USBCR-4311 is a three-port USB 3.0 hub that includes SD and microSD card readers. The hub will expand your computer’s capabilities by adding three USB ports to enable the transfer of photos, videos, or other large files to a computer at SuperSpeed USB 3.0 rates up to 5 Gbps. The USBCR-4311 is ready to go to work without any additional software or downloads.
Precautions Important! This hub is not intended for charging connected USB devices. »» Speeds may vary based on system configuration and card speed. »» Do not attempt to disassemble or repair this product. »» Clean this product with only a soft, dry cloth.
Overview SD card slot microSD card slot 3 USB 3.
LED Status When the LED is on, the card reader is connected to a powered port on the computer. Connecting the Hub Connect the hub to your computer’s USB port or compatible OTG device with the integrated USB-C cable. In order for the hub to operate at maximum transfer rates, the hub must be connected to a computer’s USB 3.0 port. Connecting to a computer’s USB 2.0 port will result in slower performance. Using the Card Readers Compatible formats: SD, SDHC, SDXC, microSD, microSDHC, microSDHX.
Specifications Ports Compatible Memory Cards Data Transfer Rate System Requirements Operating Temperature Operating Humidity Dimensions (L × W × H) Cable Length Weight 6 USB 3.0 Standard-A (×3) SD, SDHC, SDXC microSD, microSDHC, microSDXC USB 3.0 SuperSpeed 5 Gbps Windows XP or later macOS 10.4 or later Linux 2.4.1 or later 32°F to 122°F (0°C to 50°C) 20% to 85% RH 3.9 × 1.7 × 0.6 in. (9.9 × 4.4 × 1.5 cm) 3.6 in. (9.2 cm) 1.8 oz.
One-Year Limited Warranty This Xcellon product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.
GG2
