User Manual
Thank you for choosing Xcellon. The Xcellon USBCR-4311-A is a three-port USB 3.0 hub that includes SD and microSD card readers. The hub will expand your computer’s capabilities by adding three USB ports to enable the transfer of photos, videos, or other large files to a computer at SuperSpeed USB 3.0 rates up to 5 Gbps. The USBCR-4311-A is ready to go to work without any additional software or downloads. The hub’s reversible USB Type-C connector is compatible with Thunderbolt 3 for expanded functionality.
Precautions Important! This hub is not intended for charging connected USB devices. »» Speeds may vary based on system configuration and card speed. »» Do not attempt to disassemble or repair this product. »» Clean this product with only a soft, dry cloth. »» All images are for illustrative purposes only.
Overview USB Type-C connector microSD card slot 3 SD card slot 4 USB 3.
LED Status The status LED will turn on when the hub is connected to a powered port on the computer. Connecting the Hub Connect the hub to your computer’s USB Type-C port or compatible OTG device with the integrated USB-C cable. Important! In order for the hub to operate at maximum transfer rates, the hub must be connected to a computer’s USB 3.0 port. Connecting to a computer’s USB 2.0 port will result in slower performance.
Specifications 6 Ports USB 3.0 Standard-A (×3) Compatible Memory Cards SD, SDHC, SDXC microSD, microSDHC, microSDXC Data Transfer Rate USB 3.0 SuperSpeed 5 Gbps System Requirements Windows, macOS, iPadOS, Android, Linux Operating Temperature 32°F to 122°F (0°C to 50°C) Operating Humidity 20% to 85% RH Dimensions (W × D × H) 3.5 × 1.5 × 0.5 in. (9 × 3.8 × 1.3 cm) Cable Length 5.1 in. (13 cm) Weight 1.3 oz.
One-Year Limited Warranty This Xcellon product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.
GG2
