User Manual

7
Installing the Card
PCIe cards are not hot-pluggable. To avoid damaging your card, the chassis, and
your computer, do not install a PCIe card into the Little Brother, or swap cards, while
the Little Brother is connected to your computer or a power outlet.
The Little Brother is not designed for use with graphics cards.
1 Loosen the thumbscrews until they pop out. Note that the thumbscrews cannot
be removed from the chassis.
2 Remove the chassis from the housing by pulling the front panel and sliding the
chassis out of the housing.
· Important! Do not remove the plastic layer that protects the internal board.