User Manual
Thank you for choosing Xcellon. The DWS-300B is a 2.0 speaker system that contains a colorful and entertaining light show driven by the sound of your music. In Dancing Bead mode, colorful beads that are suspended in water swirl to the rhythm of the music. Dancing Water mode fires colorful jets of water into the air along with the beat. The speakers are powered via an included USB cable that can be attached to a computer or USB wall adapter.
Precautions »» Please read and follow these instructions, and keep this manual in a safe place. »» Exposure to high sound levels can cause permanent hearing loss. Avoid listening at high volumes for extended periods of time. »» Keep this product away from flammable gases or liquids. »» Use only the correct, recommended voltage. »» Do not attempt to disassemble or repair this product. »» Handle this product with care. »» Clean this product with only a soft, dry cloth. »» Keep this product away from children.
Overview Left speaker 1 2 3 USB Mini-B power port 3.5 mm audio input port Integrated speaker connection cable (USB Mini-B plug) Right speaker 4 Speaker input connection (USB Mini-B port) Also Included »» »» »» »» »» 4 Aquatic beads Plastic container USB Standard-A male to Mini-B male cable Stereo 3.
RIGHT LEFT 1 4 2 3 5
Preparing the Speakers Dancing Bead Mode 1. Fill the included plastic container with water, and soak up to 30 aquatic beads in the water for approximately 4 hours. 2. Open the top lids of both speakers, and place up to 15 beads into each container. 3. Pour water into each container. The recommended amount is approximately 9–10 fluid ounces (280 ml) for the jets to be most effective, but you can experiment with different amounts. 4.
Connecting the Speakers 1. Make sure the speakers are standing upright on a flat and stable surface. 2. Plug the USB Mini-B plug of the integrated cable into the USB port on the right speaker. 3. Plug the Mini-B end of the included USB cable into the USB power port in the left speaker, and the Standard-A end into a USB power source. The power source can be your computer’s USB port or a USB AC wall adapter (not included). The lights in the speakers will turn on.
Troubleshooting 8 Problem Solution The speakers will not turn on. • Make sure the speakers are plugged into a USB power source. • If you are using a computer as your power source, make sure the computer is turned on and awake. • There may be a problem with this particular USB port. Try plugging the speakers into a different USB port on your computer. • If the speakers are plugged into a USB AC adapter, make sure that both the cable and the adapter are completely plugged in.
Problem Solution There is no sound coming from the speakers. • Check the audio connection. Make sure the audio cable is completely plugged into both the audio device and the speakers. • Make sure the audio device is turned on and playing. • Make sure the volume on the audio device is turned up. • Check to verify that the audio jack of your device is outputting sound. • Make sure you are using the audio cable for sound, and not the USB cable. The USB cable is strictly for power.
Specifications 10 Audio input 1/8” (3.5 mm) Peak power handling 3 W per speaker Dimensions (W × D × H) 2” × 2.6” × 8.9” (5 × 6.7 × 22.5 cm) Weight (without water) 1.15 lb.
One-Year Limited Warranty This Xcellon product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.
GG1
