Datasheet

不要将电芯至于微波或高压容器内，突然高温或密封状态破坏会引起电芯产热，冒烟，破裂或起火。
2.12 Don’t solder the cell directly. Excessive heating may cause deformation of the cell components such as the
gasket, which may lead to the cell swelling, leakage, explosion, or ignition.
不要直接锡焊焊接电芯，过热会导致绝缘垫圈等电芯部件变形，引发电芯变形、漏液、爆炸或者起火。
2.13 Do not touch a leaked cell directly or put a leaked cell nearby fire.
不要直接接触漏液电芯或将漏液电芯放置在火源旁。
2.14 Don’t use abnormal cell which has damages by shipping stress, drop, short or something else, and which
gives off electrolyte odor.
不要使用由于运输碰撞、跌落、短路或其它原因造成损伤以及有电解液泄露的异常电芯。
3.2 For the sake of safety assurance, please discuss the equipment design, its system and protection circuit of
Lithium-ion cell with Lishen in advance. And consult about the high rate current, rapid charge and special
application in the same way.
为了安全起见，如有设备设计，锂离子电芯系统保护电路或高电流，快速充电和其它方面的特殊应用,请先咨询
力神公司相关事宜。