Safety data sheet

1
MATERIAL SAFETY DATA SHEET
Ref No: CSMSDS16
1. Manufacturer
Name of Company : Cameron Sino Technology Limited
Address : Unit 6-7, 11/F, Ho Lik Centre, 66A Sha Tsui Road, Tsuen Wan, N.T., Hong Kong
Representative : Mr. Longman CHEUNG
Tel No. : 852-24269811
2. Name of Product
Lithium ion or Lithium polymer rechargeable battery
3. Substance Identification
Substance : Lithium ion or Lithium polymer rechargeable battery
UN Class : Classified as Lithium ion or Lithium polymer batteries (UN3480), 2016 IATA Dangerous
Goods regulations 57
th
edition Packing Instruction 965 Section IB is applied. The
product is handled as Non-Dangerous Goods by meeting the following requirements.(1)
Lithium ion or Lithium polymer batteries offered for transport are not subject to other
additional requirements of the UN Regulations if they meet the following:
1. for cells, the watt-hour rating is not more than 20Wh;
2. for batteries, Watt-hour rating is not more than 100Wh.
The Watt-hour rating must be marked on outside of the battery case except those
manufactured before 1 January 2009 which may be transported without this marking
until 31 December 2010.
3. each cell or battery is of the type proven to meet the requirements of each test in the
UN Manual of Tests and Criteria Part III subsection 38.3.
Cells and batteries must be packed in strong outer packaging that conform to 5.0.2.4,
5.0.2.6.1 and 5.0.2.12.1
And they are out of scope for Special Provision A154 and comply with Special Provision
A164.
4. Hazardous and Toxicity Class
Class name : Not applicable for regulated class
Hazard : It may cause heat generation or electrolyte leakage if battery terminals contact with
other metals. Electrolyte is flammable. In case of electrolyte leakage, move the battery
from fire immediately.
5. First Aid Measures
The product contains organic electrolyte. In case of electrolyte leakage from the battery, actions described
below are required.
Eye contact : Flush the eyes with plenty of clean water for at least 15 minutes immediately, without
rubbing. Take a medical treatment, if appropriate procedures are not taken, this may
cause an eye irritation.
Skin contact : Wash the contact areas off immediately with plenty of water and soap. If appropriate
procedures are not taken, this may cause sores on the skin.
Skin contact : Wash the contact areas off immediately with plenty of water and soap. If appropriate
procedures are not taken, this may cause sores on the skin.