Installation Guide

Made of HDPE knitted polyethylene fabric which will not mold or mildew.
Perfect for privacy and dust control on temporary fences and
construction sites, this product provides an 85% blockage. Four-ply
reinforced binding and #4 brass grommets around borders on all four
sides. Standard height is 5’8” for a 6’ fence.
PRODUCT SPECIFICATIONS
Material Composition
Knitted HDPE High Density Polyethylene
Filament Strength
50 lbs. per ft.
Material Break Strength
500 lbs. per ft.
Material Weight
145 grams per square meter
Crystalline Melt Point
133
o
C
Composition of UV Inhibitor
1.5% Amplas CM111821 / 1.5% Equaster CM106000
Shade Percentage
85%
Flammability
Point
364
o
C
Durability – This product is resistant to severe weather conditions, salt water, road dirt, mold &
mildew.
Maintenance – Pressure cleaning of surface contaminants is quickly accomplished with plain
water.
Wind Load Disclaimer – Xcel Fence will not be responsible for damage resulting from windy
conditions due to insufficient structural support.
Selling Features & Benefits
• 4-ply reinforced edges with double stitching for durability
• #4 brass grommets every 2’ on all four sides
• Maximum air passage
• 1 Year Manufacturers Limited Warranty
6’ High
100’ Wide
Use heavy duty cable ties to secure onto fence panel.