Instructions / Assembly

Installation of a Privacy Screen
The goal of a proper installation is to have a properly positioned, wrinkle-free privacy screen installation.
 DO NOT ATTEMPT INSTALLATION ON A WINDY DAY.
Equipment needed but not included:
 7″ – 50lb zip ties,
 hog ring pliers and hog rings (optional)
 ladder (depending on height of fence)
Layout entire length of the privacy screen and start by securing the top beginning edge with a zip tie to
the fence. Secure the privacy screen at the proper height - typically, the bottom of the netting would be
4″ off of the ground to allow air to pass and avoid damage from weed eaters.
Secure the bottom starting edge with a zip ties as well; make sure the starting edge is straight. This helps
keep the netting tight and wrinkle free.
Secure the top edge of the privacy netting with zip ties through ALL button holes, ensuring the netting is
tight as you move down the length of the netting. Do NOT skip grommet holes.
If you want a more permanent installation; you can go back with a hog ring pliers and use steel hog rings
to secure your privacy netting.