Instructions / Assembly
A S S E M B L Y I N S T R U C T I O N S
HZMXFC38
A. Seat( 1 unit)
B. Backrest( 1 unit)
C. Front legs part( 1 unit)
D. Arm( 2 units)
E. Allen Wrench( 1 unit)
F. Carriage bolts 2.4”( 2 units)
G. Carriage bolts 2.55”( 2 units)
H. Carriage bolts 2”( 2 units)
I. Bolts 2.4”( 2 units)
J. Flat washer( 6 units)
K. Lock nut( 6 units)
Step- 1:
Position front legs part(C) to seat(A)
corresponding 2 holes, insert 2.4"
carriage bolts, one flat washer and one
lock nut, manually tighten.
Important note: Do not fully tighten.
Step- 2:
Position arms(D) to front legs(C)
corresponding 2 holes, insert 2.55" carriage
bolt, one flat washer and one lock nut,
manually tighten.
Important note: Do not fully tighten.
WA R N I N G :
U S E O N LY T H E A L L E N W R E N C H ( E )
P R O V I D E D . D O N O T U S E P O W E R
TO O L S . D O N O T O V E R T I G H T E N .
WARNING:
DO NOT SIT ON THE
ARMRESTS!
Step- 3:
Position glider piece on the backrest(B) to
seat( A) corresponding 2 holes, insert 2"
carriage bolt, one flat washer and on lock nut,
manually tighten.
Position backrest(B) to arm(D)
corresponding 2 holes, insert 2. 4” bolts
and manually tighten.
Important note: Do not fully tighten.