Instruction manual

Feature Description
38 XBLUE Networks
3
Flexible Numbering Plan
FlexibleNumberingPlan
The X-50 is preprogrammed with a default numbering plan which may be changed to suit customers’ needs.
When changing the numbering plan it is important to remember that the numbers entered cannot conflict with
the numbers entered in the Emergency Call Table.
X-50
to X-50
Each X-50 VoIP Telephone System can be one of ten systems that creates a voice network. Once connected,
extensions will be able to dial directly to extensions on the network. For example, if an extension (111) in Boston
wanted to call an extension (211) in San Francisco they would dial 211. In the call routing table 211 will be
directed to the San Francisco Gateway and the call will be connected. Similarly, telephone line calls can be routed
to remote gateways for cost effective call processing.
HotDialKeypad
The X2020 telephone endpoints support hot dial keypad dialing, which allows a user to dial a telephone number
without lifting the handset or pressing the speaker button.
LastNumberRedial
Last Number Redial also known as Redial is used to press one button for quick access to the last thirty numbers
dialed from that extension.
LeastCostRouting
See Call Routing
TABLE 3.3 Default Numbering Plan
Description Default Numbers Configure
Start extension number 101
End extension number 125
FXS Phone Extension 125
Operator speed-dial number 0 Day/Night Alternate Day/Night
AA/Voicemail Service Number 450
Start Virtual Extension Number 830
Start PSTN Line number 701
Start IP Trunk Line Number 711
Start Trunk Group Number 80
All Paging number 400
All Paging Range LAN/WAN/Both
Paging Group Start Number 401 (1) 401, (2) 402, (3) 403
UCD Group Start Number 430 (1) 430, (2) 431, (3) 432, (4) 433
System Speed Dial 600 600 through 699
Start Call Park Number 731