Instruction manual

Voice

204

XBLUE Networks

Single Digit Dialing Table

• VVA Code - The default is set to PCMU, the United States uses the PCMU codec, other countries use

PCMA codec.

• RTP Packet Size - At default this is set to 20 ms, and is adjustable from “Dynamic, 10 - 60”, but should

remain set to 20 unless otherwise instructed.

• DISA - Direct Inward System Access - this feature, when enabled, allows inbound callers to enter a code

and gain access to system features such as outbound calling. Note: Enabling this feature may result in

unexpected long distance charges, which are the sole responsibility of the owner/user of the

equipment.

• Dial by Name Code - Enter the code that will be used by callers, when dialing a persons name, once

they are answered by the automated attendant. Once this code is selected, it will automatically reserve

the entered number on all 10 menus.

SingleDigitDialingTable

The X-50 system is equipped with ten (10) Single Digit Dial Menus that allows the administrator to program menu

trees which are a series of choices that a caller can dial to process their call more efficently. For example, a main

greeting may instruct the caller to dial 1 for sales, which accesses menu 2. Then the caller is instructed to dial 1 for

Northeast Sales, 2 for Central Eastern Sales, Southeast Sales, etc.