Instruction manual

Voice

190

XBLUE Networks

Numbering Plan

• The X-50 has 4 UCD groups, each can be programmed as an All Ring (rings all extensions

within the group), Linear (if a busy extension is found it will hunt to another group, but will not

continue to hunt if the extension rings), or Distributed (rings the extension that is on-hook and

idle the longest.

• No Answer Time - The no answer time becomes active when a group is defined as Linear or

Distributive. The timer is adjustable between 10 and 120 seconds. This timer is not active when

set to “All Ring”.

• Timer Enable - The No Answer Timer (when set to either Linear or Distributive) the timer can be

enabled or disabled.

• Reroute Time - At the expiration of the Reroute Time the call will be routed to the reroute

destination. The timer is adjustable from 10 to 120 seconds.

• Reroute Destination - Calls can be rerouted to the main auto attendant, or to Voicemail.

• UCD Group Name - Each UCD group can be labeled with a different name.