Manualshelf

Instruction manual

ManualsBrandsXBLUE Networks ManualsNetworkingX-50 WiFi VoIP Phone
151152153154155156157158159160
XBLUE Networks
157
Wireless Programming
Wireless Bridge
8
• If disabled, then no action is needed
• Select between Wireless Access Point and Wireless Bridge
• Select enabled and enter the SSID and MAC Address or select Enabled (Scan) to have the X-50 locate the
correct wireless device.
Select between “Wireless Access Point” and “Wireless Bridge”, and then select “Enable” and enter the SSID
and MAC Address or Enable (Scan) and have the X-50 locate the Wireless Device.