Instruction manual

XBLUE Networks

137

Advanced Programming

Routing

Static Routing

Static routing is used to establish IP Packet routing without requiring the devices to communicate with eachother. This

is considered a “no fault” network, because there is no way for the network to recover in the event of a failure.

• Enter the Destination Network Address

• Enter the Subnet Mask of the Destination Network Address

• Enter the Gateway IP Address

• Select if the routing will be sent through the WAN/eth0 or the LAN/br0

Select Static Route, and then select “Add” to the static routing address, select “save” to active the route.