Instruction manual

Advanced Programming

118

XBLUE Networks

Advanced - NAT

• Use Interface -

• Service Name - The administrator may create their own or use one of the of the preprogrammed

commonly used services.

• Custom Service - If used, this required field allows the administrator to enter a name to be used for the

custom service.

• Server IP Address - Enter the IP address of the “Server” or device that will receive the incoming TCP/

UDP traffic.

• External Port Start - Enter the start port of the service to be directed to the entered Server IP Address.

• External Port End - Enter the end port of the service to be directed to the entered Server IP Address.

This may be the same as the start port number.

• Protocol - Select the protocol to be used TCP, UDP or Both.

• Internal Port Start - This port should match the external Port Start entry

• Internal Port End - This Port should match the External Port End entry