User's Manual

17
- Select the profile name that wanted to delete from the “Profile name” drop
down menu, and press “Delete” button to delete it
“Other” group:
Press the “Advanced Setting” button, then the Advanced Setting page is
shown as
- Select the Window User Interface by the “Language” down drop menu.
If the English item is selected, all functions of window are described with
English. Select the Traditional Chinese item, and they are described with
Traditional Chinese.
- At “Power consumption Setting” group, select which power save level want
to be set by checking CAM Mode, Fast Power-Saving mode or Maximum
Power-Saving mode. The default is CAM mode. If the most save mode want to
use, select the Maximum Power-Saving mode, but it throughput is lower than
CAM and Fast Power-Saving mode. The throughput of “Fast Power-Saving
mode” is better than “Maximum Power-Saving mode”, but its power save is
less than “Maximum Power-Saving mode”.
- At “Country Roaming” group, the default depends on the region of
EEPROM. Select other region from “User Select” drop down menu, or check
“World Mode” item to set it to the word mode. When the word mode is set, it
depends on the behavior of AP. If the WLAN card is re-plug , the setting will
return to default setting.
- At “Fragmentation Threshold” bar, drop and move cursor to set the
fragmentation threshold point, the range is from 256 to 2346 bytes.
- At “RTS / CTS Threshold” bar, drop and move the cursor to set the
RTS threshold point, the range is from 0 to 2347 bytes.