User's Manual

X7968r / X7967r / X7927r / X7922r User’s Guide
82
Attribute Value
State Current state of the device:
Idle – not connected or attempting to connect
HandShake – connecting/hunting for remote
modem
Training – connecting/found a remote modem
Showtime – connected to remote modem
Watchdog Watchdog timer which confirms that the DSP is
executing a program correctly
Operation Progress Detailed startup information to be used for
debugging
Last Failed This value is reset to 0 each time a startup is
attempted. If there is a failure, it indicates the
reason for the failure.
Tx Bit Rate Transmit rate (bits per second) of the device
Rx Bit Rate Receive rate (bits per second) of the device
Tx Cell Rate Transmit rate (cells per second) of the device
Rx Cell Rate Receive rate (cells per second) of the device
Phy TXCell Count Transmit ATM cell counter
Phy RXCell Count Receive ATM cell counter
Phy Cell Drop Count UTOPIA cell drop counter
Overall Failure Indicates the cause of failure
Local ITUCountry Code Country code used by the device (modulation
specific)
Local SEF Number of severely errored frame defects
received by the device
Local End LOS Number of loss of signal defects received by the
device
Local SNRMargin The local Signal to Noise Ration margin
Local Line Attn The local attenuation values
Local Tx Power Current transmit power attenuation of the device
Local Fast Channel Rx
Rate
Receive rate (bits per second) of the device on
the fast path
Local Fast Channel Tx
Rate
Transmit rate (bits per second) of the device on
the fast path
Local Fast Channel FEC Instances of Forward Error Correction required
by the device on the fast channel
Local Fast Channel CRC Number of CRC errors received by the device
on the fast channel
Local Fast Channel HEC Number of ATM Cell Header errors corrected by
the device on the fast channel
Local Fast Channel NCD Number of no cell delineation received by the
device on the fast channel
Local Fast Channel
OCD
Number of out of cell delineation received by the
device on the fast channel
Local Interleaved
Channel Rx Rate
Receive rate (bits per second) of the device on
the interleaved path
Local Interleaved
Channel Tx Rate
Transmit rate (bits per second) of the device on
the interleaved path