User's Manual

X7968r / X7967r / X7927r / X7922r User’s Guide
25
The following page opens to confirm the settings:
Figure 24: Configuring LAN - Confirm Settings
A summary of the WAN and LAN configuration is displayed. Click Apply to make the
changes else click Cancel to discard the changes.
Configuring the WAN IP Settings if RFC1483 (Routed)
Figure 25: Configuring WAN IP Settings
To Configure WAN IP settings,
 select one of the following options:
 Obtain an IP address automatically.
 Use the following IP address: specify the WAN IP Address and subnet mask.
 Click to Enable NAT.
 Click Next.
The same procedure as configuring PPPoA or PPPoE, the configuring the LAN site settings
and confirming setting pages will be shown, please follow up above descriptions to finish
the settings.