User's Manual

X7968r / X7967r / X7927r / X7922r Users Guide
23
Select/Unselect to enable or disable the Access Configurator option. In case, you
enable the access configurator, enter the value in Access Concentrator.
Select one of the following options:
Obtain an IP address automatically.
Use the following IP address: specify the WAN IP Address.
Click to Enable NAT.
Click to Add Default Route
Click Next.
Configuring the Broadband User Name and Password
Figure 22: Configuring Broadband User Name and Password
To configure the broadband user name and password:
Enter the user name in Broadband User Name.
Enter the password in Password and confirm it by entering again in Confirm
Password.
Specify the network session by selecting Always On, Dial on Demand or
Manually Connect option. You can also opt to disconnect after a specified period
when no user activity is detected. By default, the option Always On is selected.
Click Next.