User's Manual

X5671 User’s Guide
4
X5671 Front Panel
The front panel of this X5671 will be described here which cover all front panel
definitions of other models.
Figure 2: X5671 Front Panel and LEDs
Connector and LED definitions from left to right:
Label Color Function
Power Green
or Red
GREEN off : No power
GREEN on : Power on
RED on : Self-test fails
DSL Green /
Yellow
On : Physical layer sync up successfully.
Off : No connection or no signal
Blink : Physical sync up progress
Internet Green
or Red
GREEN off : No connection to Internet
GREEN on : The device gets an IP address
successfully in router mode
GREEN blinking : Data being transmitted.
RED on : PPP Authenication of the device failed. Or it can
not get an IP address in ROUTER mode.
Ethernet Green On : LAN link established and active
Off : No LAN link
Blink : Data being transmitted
WLAN Green On : WLAN service is enabled
Off : WLAN service is disabled
Blink : Data being transmitted