User's Manual

X5671 User’s Guide

4 If the Network Authentication is Mixed WPA2/WPA-PSK (pre-shared key), enter

the WPA Pre-Shared Key and enter WPA Group Rekey Interval, WPA Encryption

Method (TKIP, AES, TKIP+AES), enable or disable WEP encryption. If WEP

Encryption is enabled, select the Encryption Strength with 64bits or 128bits,

select the current Key Index and enter the key and four keys when necessary

4 Click Save/Apply to save the configuration.

MAC Filter

With this configuration, you could allow or deny wireless to access the device by

wireless MAC address filtering feature. It is disabled as default.

Figure 53: Wireless MAC Filter Configuration

Global Setting

4 Select the MAC Restrict Mode from one of Disable (no MAC filter), Allow (only

those PCs with MAC addresses in the table can surf Internet) and Deny (only

those PCs with MAC addresses in the table can not surf Internet).

4 Click Add to add an entry or Remove to remove the specified entry.

Figure 54: Add a Wireless MAC Address

Global Setting

4 Enter the MAC Address of wireless client

4 Click Save/Apply to save the configuration.