User's Manual

X5671 User’s Guide
37
Global Setting
4 Check to select the DSL modulation modes.
4 Select the DSL phone line pair, inner pair or outer pair. The inner pair is default
setting.
4 Check to select the Capabilities, Bitswap and SRA (Seamless Rate Adaption).
4 Click Apply to save the configuration
4 Click Advanced Settings to get details, please contact technician for support.
Port Mapping
The page provides Port Mapping configuration. In default, the LAN1 to LAN4, wireless,
virtual wireless_guest and Routed PVC are grouped together as a single Ethernet
environment. Port Mapping supports multiple ports to VLAN groups. Each VLAN
group will perform as an independent network. To support this feature, you must
create mapping groups with appropriate LAN and WAN interfaces.
Figure 49: Port Mapping Configuration
Click Add to add VLAN setting.
Check Remove and click Remove to remove the specified entry.