User's Manual

X5671 User’s Guide
34
Static Route
Figure 42: Static Route Configuration
Click Add to add the static route path.
Figure 43: Add Static Route Configuration
Global Setting
4 Enter the Destination Network Address and Subnet Mask (range)
4 Check Use Gateway IP Address and enter the IP address where packet will be
forwarded to.
4 Check the Use Interface and select it from the list
4 Click Save to save the configuration
RIP
To activate RIP for the device, select the ‘Enable’ radio button for Global RIP mode. To
configure an individual interface, select the desired RIP version and operation,
followed by placing a check in the ‘Enable’ checkbox for the interface.
Figure 44: Default Gateway Configuration