User's Manual

X5671 User’s Guide
33
Global Setting
4 Enter the Username
4 Select the Browser’s MAC Address or Other MAC Address to enter the specific
PC MAC address.
4 Check those days you want to block above PC to surf Internet.
4 Enter the Start Blocking Time and End Blocking Time
4 Click Save/Apply.
Routing
The section shows the IP addresses or address routes for the computers connected
to the gateway to reach different destinations, such as the local network, the gateway,
or the Internet. The Routing feature provides three more setting pages including
Default Gateway, Static Route and RIP.
Default Gateway
Figure 41: Default Gateway Configuration
Global Setting
4 Check Enable Automatic Assigned Default Gateway checkbox, this router will
accept the first received default gateway assignment from one of the PPPoA,
PPPoE or Static IP/DHCP interface. If the checkbox is not checked, enter the
static default gateway AND/OR a WAN interface.
4 Click Save to save the configuration
NOTE: If changing the Automatic Assigned Default Gateway from “unselected” to
“selected”, you must reboot the router to get the automatic assigned default gateway