User's Manual

X5671 User’s Guide
29
Figure 33: Add - Outgoing IP Filter Setup
Global Setting
4 Enter the Filter Name
4 Select the Protocol from the selection list.
4 Enter the Source IP Address and Subnet Mask (range of IP addresses) of packet
4 Enter the one port or multi ports (port range)
4 Enter the Destination IP Address and Subnet Mask (range of IP addresses) of
packet
4 Enter the one port or multi ports (port range)
4 Click Save/Apply
By default, all incoming IP packets from WAN are blocked to access PCs in LAN, but
some IP packets can be accepted by setting up filters.
Figure 34: Incoming IP Filter Setup