User's Manual

X5671 User’s Guide
21
MAC Encapsulation Routing (MER)
Figure 22: WAN Connection,MER Configuration
To configure the IP over Ethernet settings:
4 Select “Obtain an IP address automatically” or “Use the following (fixed) IP
address” and then also enter the WAN IP address and WAN Subnet Mask.
4 Select “Obtain default gateway automatically” or “Use the following default
gateway” and then also enter the gateway IP address and Use WAN Interface
where packets will be sent to.
4 Select “Obtain DNS server address automatically” or “Use the following DNS
server addresses” and then also enter the IP addresses of Primary DNS server
and Secondary DNS server.
4 Click Next
The NAT configuration and WAN Setup Summary page will show up. Please refer
related pages above for reference. Click Save if correct and click Back to restart the
configuration again.