User's Manual

X5671 User’s Guide
20
Figure 20: WAN Connection, PPPoA or PPPoE Configuration
NAT (Network Address Translation) setting:
4 Check to enable NAT that allows multiple PCs surfing Internet simultaneously
by using the same WAN IP address.
4 Check to enable Firewall
4 Check to enable IGMP Multicast to avoid the multicast packet flooding to other
LAN ports where do not need this IGMP packet to get better efficiency in
Ethernet port.
4 Check to enable WAN service
4 Enter the Service Name if you want to change it.
4 Click Next
The WAN Setup Summary page shows all of parameters.
Figure 21: WAN Connection, PPPoA or PPPoE Configuration
Click Save if correct and click Back to restart the configuration again.