User's Manual

EG102 User’s Guide
40
 Check to enable Wireless feature
 Check to enable Hide Access Point to hide from active scan of wireless client
 Check to enable Clients Isolation that wireless clients can not share information
to each other.
 Check to disable WMM Advertise where WMM stands for WiFi Multimedia. This
technology maintains the priority of audio, video and voice applications in a Wi-Fi
network so that other applications and traffic are handled in lower priority.
 Enter the wireless network name (SSID)
 The BSSID is the MAC address of device
 Select the Country from the list
 Enter the Maximum Wireless Client Number allowed to associate with the device
 Check to enable Wireless Guest Network to create a virtual wireless AP with
different SSID and security key. There are three more guests available for
configuration.
 Enter the Guest SSID
 Click Save to save the configuration
Se c urity
The device provides wireless connection with security including authentication
method and data encryption to protect your data in the air.
Figure 48: Wireless Setting – Security
Global Setting
 Select the SSID from the list, then set the related security parameters
 Select the method of Network Authentication. It could be OPEN (none), Shared,
802.1X, WPA, WPA-PSK, WPA2, WPA2-PSK, Mixed WPA2/WPA, Mixed
WPA2/WPA-PSK
 Select the method of WEP Encryption if Network Authentication is Open. Select
the Encryption Strength with 64bits or 128bits, select the current Key Index and
enter the key and four keys when necessary if WEP Encryption is enabled.