Daim Ntawv Qhia Tus Neeg Siv
Table Of Contents
- Safety information
- 1. Product overview
- 2. Installing the product
- 3. Using recording features
- 4. Using the mobile viewer
- 5. Using the PC viewer
- 6. Settings
- 6.1 Managing the memory card
- 6.2 Setting the camera
- 6.3 Setting recording features
- 6.3.1 Setting the continuous impact detection sensitivity
- 6.3.2 Setting the Super Night Vision feature
- 6.3.3 Setting parking mode
- 6.3.4 Setting the impact sensitivity in parking mode
- 6.3.5 Setting the motion detection sensitivity
- 6.3.6 Setting the record timer feature
- 6.3.7 Setting the battery protection feature
- 6.3.8 Setting the battery cutoff voltage feature
- 6.3.9 Setting the battery protection feature for wintertime
- 6.4 Setting road safety features
- 6.4.1 Setting the safety cameras
- 6.4.2 Setting the mobile zone alert
- 6.4.3 Identifying the vehicle type
- 6.4.4 Initializing the ADAS calibration setting
- 6.4.5 Setting the lane departure warning sensitivity
- 6.4.6 Setting the lane departure detection speed
- 6.4.7 Setting the forward collision detection sensitivity
- 6.4.8 Setting the low speed forward collision detection sensitivity
- 6.4.9 Setting front vehicle departure warning
- 6.5 Configuring the system settings
- 6.6 Configuring network function settings
- 7. Accessing the product information
- 8. Upgrading the firmware
- 10. Troubleshooting
- 11. Specifications
Settings
50
6.6 Configuring network function settings
You can activate or deactivate network function and driving impact notification.
6.6.1 Setting the network function
Follow the instructions to turn on or off the network function.
1
From the mobile viewer, tap Dash Cam Settings > Network Function Settings.
2
From Network Function, select Enabled or Disabled. The new setting is applied automatically.
6.6.2 Setting sensitivity for driving impact notification
You can set the detection sensitivity to notify you if an impact is detected while driving. Follow the
instructions to select a sensitivity for the driving impact notification.
1
From the mobile viewer, tap Dash Cam Settings > Network Function Settings.
2
From Driving Impact Notification, select the desired sensitivity. The new setting is applied
automatically.
1G: An acceleration of 1G equates to a rate of change in velocity of approximately 35 kilometers per hour (22
mph) for each second that elapses.
•Impact 1 = 3G
•Impact 2 = 4G
6.6.3 Setting driving impact video upload
You can choose to upload driving impact videos to the cloud server if an impact is detected while driving.
Follow the instructions to enable or disable this feature.
1
From the mobile viewer, tap Dash Cam Settings
>
Network Function Settings.
2
From Upload Driving Impact Video, select Enabled or Disabled. The new setting is applied
automatically.