Daim Ntawv Qhia Tus Neeg Siv
Table Of Contents
- Safety information
- 1. Product overview
- 2. Installing the product
- 3. Using recording features
- 4. Using the mobile viewer
- 5. Using the PC viewer
- 6. Settings
- 6.1 Managing the memory card
- 6.2 Setting the camera
- 6.3 Setting recording features
- 6.3.1 Setting the continuous impact detection sensitivity
- 6.3.2 Setting the Super Night Vision feature
- 6.3.3 Setting parking mode
- 6.3.4 Setting the impact sensitivity in parking mode
- 6.3.5 Setting the motion detection sensitivity
- 6.3.6 Setting the record timer feature
- 6.3.7 Setting the battery protection feature
- 6.3.8 Setting the battery cutoff voltage feature
- 6.3.9 Setting the battery protection feature for wintertime
- 6.4 Setting road safety features
- 6.4.1 Setting the safety cameras
- 6.4.2 Setting the mobile zone alert
- 6.4.3 Identifying the vehicle type
- 6.4.4 Initializing the ADAS calibration setting
- 6.4.5 Setting the lane departure warning sensitivity
- 6.4.6 Setting the lane departure detection speed
- 6.4.7 Setting the forward collision detection sensitivity
- 6.4.8 Setting the low speed forward collision detection sensitivity
- 6.4.9 Setting front vehicle departure warning
- 6.5 Configuring the system settings
- 6.6 Configuring network function settings
- 7. Accessing the product information
- 8. Upgrading the firmware
- 10. Troubleshooting
- 11. Specifications
Settings
49
6.5.5 Setting the time zone
Follow the instructions to set the time zone.
1
From the mobile viewer, tap Dash Cam Settings
>
System Settings.
2
From Time Zone, select the desired time zone. The new setting is applied automatically.
6.5.6 Setting the daylight saving time
Follow the instructions to set the daylight saving time.
1
From the mobile viewer, tap Dash Cam Settings
>
System Settings.
2
From Daylight Saving, select Enabled or Disabled. The new setting is applied automatically.
6.5.7 Setting the speed unit
Follow the instructions to set the speed unit.
1
From the mobile viewer, tap Dash Cam Settings
>
System Settings.
2
From Speed Unit, select km/h or mph.
6.5.8 Setting the speed stamp
Follow the instructions to turn on or off the speed stamp feature.
1
From the mobile viewer, tap Dash Cam Settings
>
System Settings.
2
From Speed Stamp, select Enabled or Disabled. The new setting is applied automatically.
6.5.9 Setting the voice recording
Follow the instructions to turn on or off the voice recording feature.
1
From the mobile viewer, tap Dash Cam Settings
>
Voice Recording.
2
From Voice Recording, select Enabled or Disabled. The new setting is applied automatically.