Daim Ntawv Qhia Tus Neeg Siv
Table Of Contents
- Safety information
- 1. Product overview
- 2. Installing the product
- 3. Using recording features
- 4. Using the mobile viewer
- 5. Using the PC viewer
- 6. Settings
- 6.1 Managing the memory card
- 6.2 Setting the camera
- 6.3 Setting recording features
- 6.3.1 Setting the continuous impact detection sensitivity
- 6.3.2 Setting the Super Night Vision feature
- 6.3.3 Setting parking mode
- 6.3.4 Setting the impact sensitivity in parking mode
- 6.3.5 Setting the motion detection sensitivity
- 6.3.6 Setting the record timer feature
- 6.3.7 Setting the battery protection feature
- 6.3.8 Setting the battery cutoff voltage feature
- 6.3.9 Setting the battery protection feature for wintertime
- 6.4 Setting road safety features
- 6.4.1 Setting the safety cameras
- 6.4.2 Setting the mobile zone alert
- 6.4.3 Identifying the vehicle type
- 6.4.4 Initializing the ADAS calibration setting
- 6.4.5 Setting the lane departure warning sensitivity
- 6.4.6 Setting the lane departure detection speed
- 6.4.7 Setting the forward collision detection sensitivity
- 6.4.8 Setting the low speed forward collision detection sensitivity
- 6.4.9 Setting front vehicle departure warning
- 6.5 Configuring the system settings
- 6.6 Configuring network function settings
- 7. Accessing the product information
- 8. Upgrading the firmware
- 10. Troubleshooting
- 11. Specifications
Using the mobile viewer
24
Connecting via hotspot
1
On your iOS device, open the App Store, and download and install THINKWARE CLOUD.
2
Run THINKWARE CLOUD.
3
Tap Dash cam connection is required. at the bottom of the screen.
4
Tap Hotspot Connection
>
Configure New Connection.
5
On the product, press the Wi-Fi ( ) button.
6
From the THINKWARE CLOUD, tap Next.
The Wi-Fi Settings screen will appear.
7
From the network list, select the Wi-Fi network starting with "Thinkware."
8
Enter "123456789" in the Password field, and tap Join.
The product is connected to your iOS device via Wi-Fi.
9
Return to the THINKWARE CLOUD, enter the password for your hotspot, and tap Next.
•To view the password for your hotspot, from the home screen of your iOS device, tap Settings
>
Personal Hotspot.
10
Tap Turn On Hotspot.
11
Confirm the pop-up message and tap OK.
12
Turn on the Personal Hotspot and wait until you hear "Connected to the Internet."
Do not leave the personal hotspot settings screen. Connection is not completed if you leave the
personal hotspot settings screen before you hear "Connected to the Internet."
13
Return to the THINKWARE CLOUD.
The product is connected to your iOS device via hotspot.