User Manual

12 English
PROsine Inverter Owners Manual
5. Troubleshooting Guide
This section describes potential installation and configuration problems and solutions, including fault conditions and indicators.
5.1 Fault Conditions and Indicators
The following fault conditions are displayed on the control panel along with an alarm sound and blinking LCD back-light.
The table below provides some troubleshooting tips:
noitacidnIlenaPlortnoCnoitidnoCtluaF noituloS
NWODTUHSTTABHGIHhgihootegatlovyrettaB (othctiwsgninrutybretrevniteseryllaunaM.metsysgnigrahcyrettabhtiwtluafrofkcehC k (otneht) I .niaga)
NWODTUHSTTABWOLwolootegatlovyrettaB (othctiwsgninrutybretrevniteseryllaunaM.yrettabegrahC k (otneht) I .niaga)
NWODTUHSDAOLREVOCAelbaborp,hgihoottnerrucyrettaB
daolrevo
.retrevninodaolecudeR
NWODTUHSPMETREVOerutarepmet-revometsyS .retrevninodaolecuderro/dnagniloocdnanoitalitnevevorpmI
NWODTUHSMETSYS
NWODTUHSTLUAF_SP
NWODTUHSCD-CD
tluaferawdrahmetsysrodaolrevO (otgnihctiwsybretrevniteserotyrT.detcennocsiderasdaolllaerusnE k (otnehtdna) I tonseodllitstinufI.)
.tnemecalperytnarraw/ecivresrofrewoptatSroreliater/tnahcrem/rotubirtsidruoytcatnocetarepo
smotpmySdnasmelborP esuaCelbissoPnoituloS
rewolrocdV0.01gnidaerlenaplortnocdnaegatlovtuptuooN
.)sledomV42nocdV4.02(
.nwodtuhsegatlovtupniwoL .elbacdnasnoitcennockcehc,yrettabegrahceR
.noitacidniegatlovon,egatlovtuptuooN (otdehctiwsretrevnI k .)
.retrevniotrewopyrettaboN
-noitcennocytiralopCDesreveR
.nepoesuflanretni
(othctiwsrewopretrevnInruT I .)
.esufyrettabkcehC.retrevnIotgniriwkcehC
tcerroc(esufecalperdnakcehcnaicinhcetecivresdeifilauqevaH
.ytiraloptcerrocevresbO.)tinufoedisninodetonesuftnemecalper
rehgihrocdV0.61gnidaerlenaplortnocdnaegatlovtuptuooN
.)sledomV42nocdV0.23(
.nwodtuhsegatlovtupnihgiH egatlovyrettabtcerrocotdetcennocsiretrevnIehterusekaM
.metsysgnigrahcfonoitalugerkcehC
wolebrotacidniegatloV.emitehtllanogninrawyrettabwoL
.)sledomV42nocdV0.22(cdV0.11
.gniriwCDrooP
.noitidnocyrettabrooP
.snoitcennocdilosekamdnaelbacreporpesU
.yrettabwenesuroyrettabegrahC
WARNING
Do not open or disassemble the PROsine Inverter. See Section 6 for instructions on obtaining service for the PROsine Inverter. Attempting to service the unit yourself may
result in a risk of electrical shock or fire.