Product Specifications

1000 Watt and 1800 Watt 230V/50Hz Sine Wave Inverters

Smart choice for power

™

Model Prosine 1000i Prosine 1800i

Output power 1000 watts 1800 watts

Surge rating 1500 watts 2900 watts

Peak output current 11 A 20 A

Output voltage (at no load) 230 VAC RMS +/-3% 230 VAC RSM +/-3%

Output voltage (over full load and battery voltage range) 230 VAC RMS +4%, -10% 230 VAC RMS +4%, -10%

Output frequency 50 Hz+/-0.05 (crystal controlled) 50 Hz+/-0.05 (crystal controlled)

Output waveform True sine wave (<3% THD) True sine wave (<3% THD)

Peak efficiency 90% 90%

No load power draw (search mode) <1.5 W <1.5 W

No load power draw (idle mode) <22 W <22 W

Input voltage range (12 V/24 V) 10 - 16 VDC / 20 - 32 VDC 10 - 16 VDC / 20 - 32 VDC

Transfer relay rating (hardwire/transfer relay models) 10 A 10 A

Transfer time AC to inverter and inverter to AC Max 2 cycles (typically 1 cycle) <2.5 seconds with Powersave “ON”

Electrical Speciﬁcations

General Speciﬁcations

Operating temperature range 0°C - 60°C 0°C - 60°C

Storage temperature range -30°C - 70°C -30°C - 70°C

AC output types Hardwireq Hardwire

Hardwire with transfer relay Hardwire with transfer relay

Schuko AC receptacle Schuko AC receptacle

LCD display panel Removable; can be mounted remotely (requires remote interface kit - see part number section)

Recommended DC fuse (12 V model) 175 A (depending on applicable installation codes) 300 A (depending on applicable installation codes)

Recommended DC fuse (24 V model) 90 A (depending on applicable installation codes) 100 A (depending on applicable installatin codes)

Dimensions (H x W x L) 115 x 280 x 390 mm 115 x 280 x 390 mm

Weight 7.0 kg 7.5 kg

Warranty Two years Two years

Part numbers 806-1070 (12 V/230 SCHUKO) 806-1870 (12 V/230 SCHUKO)

806-1074 (12 V/230 Hardwire & transfer switch) 806-1874 (12 V/230 Hardwire & transfer switch)

806-1080 (24 V/230 SCHUKO) 806-1880 (24 V/230 SCHUKO)

806-1084 (24 V/230 Hardwire & transfer switch) 806-1884 (24 V/230 Hardwire & transfer switch)

806-1883 (24 V/230 Hardwire)

808-1800 Remote interface kit) 808-1800 (Remote interface kit)

Regulatory Approvals

CE Mark - Low Voltage Directive 2006/95/EC (EN 50178:1997)

EMC Directive 2004/108/EC (EN 61000-6-1:2007 & EN 61000-6-3:2007)

Automotive EMC Directive 2004/104/EC as amended by 2005/83/EC

Note: Specifications subject to change without notice.