RV Series Remote Control Owner's Manual RC/GS RC7

Table Of Contents

Operation

38 975-0210-01-01

Over Temperature

The “Otemp/Less Load” System Status message indicates the

inverter/charger transformer and power components have

exceeded a safe operating temperature. Reduce the load on

the inverter. When the unit cools, it automatically resets and

resumes operation. If this condition occurs often, make sure

the inverter is in a cool location, has adequate ventilation, and

the cooling fan is operational.

Overload

The “Overload” System Status message appears when the load

on the inverter/charger exceeds the maximum power rating of

the unit. Reduce the load and restart the inverter/charger by

pressing the On/Off button on the RC/GS and RC7 twice.

Figure 4-13

Over-temperature Error Message

Note: Press any arrow button to cancel the buzzer.

Figure 4-14

Overload Error Message

Inverter

Charge

Batt. Full

Error

822-4A-001

System Status:

Otemp/Less Load

Error LED ON

Buzzer sounds

Error Condition

Remedy