Owner's Manual

ManualsBrandsXantech ManualsAudio and video distribution4K-compatible HDMI switcher (2 in/1 out)

XT-SW21-4K18G USER MANUAL

10019339 REV-A0

is a registered trademark of Nortek Security & Control.

User Manual

XT-SW21-4K18G

Our XT-SW21-4K18G 4K HDMI 2.0 switcher distributes 2x HDMI sources to a single output. The switcher supports full HDMI 2.0 and HDCP 2.2

with video resolutions up to and including 4K @ 60Hz 4:4:4. The 2-Way switcher also includes the advanced features of audio breakout and EDID

management.

Introduction

Key Features

• Features 2x HDMI inputs that can be switched to a single HDMI output

• Supports full HDMI 2.0 speciﬁcation 4K UHD video (4K @ 60Hz 4:4:4)

• Supports 3D signal display

• Supports all industry standard video resolutions including VGA-WUXGA and 480i-4K

• Supports all known HDMI audio formats including Dolby TrueHD, Dolby Atmos, Dolby Digital Plus and DTS-HD Master Audio transmission

• HDMI audio breakout to analogue L/R audio and coaxial digital outputs concurrently

• Supports CEC bypass (Consumer Electronics Control)

• Controlled via front panel and IR

• Advanced EDID management

• HDCP 2.2 compliant

Summary of content (6 pages)

PAGE 1
® XT-SW21-4K18G USER MANUAL XT-SW21-4K18G User Manual Introduction Our XT-SW21-4K18G 4K HDMI 2.0 switcher distributes 2x HDMI sources to a single output. The switcher supports full HDMI 2.0 and HDCP 2.2 with video resolutions up to and including 4K @ 60Hz 4:4:4. The 2-Way switcher also includes the advanced features of audio breakout and EDID management. Key Features • • • • • • • • • • Features 2x HDMI inputs that can be switched to a single HDMI output Supports full HDMI 2.
PAGE 2
® XT-SW21-4K18G USER MANUAL Panel Description Front Panel XT-SW21-4K18G Output Select 1 2 Input 1 IR Input 2 3 Output LED - Indicates if the HDMI output is connected to an Input 1 Input 2 active HDMI display 2 Select button - Press to scroll through HDMI source inputs 1 0 1 3 Output 4 34 210 DMI input H - Indicates HDMI source input selected IR Ext.
PAGE 3
® XT-SW21-4K18G USER MANUAL Adjusting The EDID Settings EDID (Extended Display Identification Data) is a data structure that is used between a display and a source. This data is used by the source to find out what audio XT-SW41-4K18G and video resolutions are supported by the display, from this information the source will discover what the best audio and video HDMI 4Kneed 18Gbps 4x1 Switch resolutions to be outputted.
PAGE 4
XT-SW21-4K18G USER MANUAL ® Example Schematic XT-SW21-4K18G Analogue Audio RS232 Cable HDMI Digital Audio IR Receiver Cable Select UP TO 2x 4K UHD SOURCES Output Input 1 Input 2 Input 1 Input 2 Output IR Ext. 0 1 5V 1A XT-SW21-4K18G EDID 3210 IR 4K UHD DISPLAY Coaxial L/R Audio Out 1 Input 2 3 4 www.xantech.
PAGE 5
® XT-SW21-4K18G USER MANUAL Infrared Commands SW41 Input 1 Input 2 Input 3 Input 4 Back Forward NEC IR: CUSTOMER CODE 1898 HEX IR 50 0000 006D 0000 0022 0157 00AC 0016 0016 0016 0016 0016 0016 0016 0041 0016 0041 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0041 0016 0041 0016 0016 0016 0016 0016 0041 0016 0016 0016 0016 0016 0016 0016 0016 0016 0041 0016 0016 0016 0041 0016 0016 0016 0041 0016 0041 0016 0041 0016 0041 0016 0016 0016 0041 0016 0016 0016 0041 0016 0689 55 00
PAGE 6
® XT-SW21-4K18G USER MANUAL Certifications FCC Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.