User's Manual

12/16 XT1

Examples:

01_10_1_1 Instruct Zone 1 T118 to power off

01_10_1_2 Instruct Zone 1 T118 to power on

01_10_1_3 Instruct zone 1 T118 to power on if it is off, or power off if it is on

12_10_3_21 Zone 12 T118 to tune into preset #21

03_10_4_107_50 Zone 3 T118 to tune to FM 107.50 MHZ

03_10_4_99_55 Zone 3 T118 to tune to FM 99.55 MHZ

(The 2nd digit after the decimal is 50K/step tuning for Europe)

03_10_2_1 Switch band to AM reception

03_10_4_05_80 Zone 3 T118 to tune to AM 580 KHZ

03_10_4_10_30 Zone 3 T118 to tune to AM 1030 KHZ

01_10_6_2 RDS information is fed to third party device continuously

01_10_8_0 Zone 1 T118 to empty the preset currently displaying

01_10_8_15 Zone 1 T118 to write the displayed frequency into preset 15

02_10_11_1 When in FM 100.05 MHZ, Zone 2 T118 outputs FM10005 in ASCII string

02_10_11_5 When in FM 100.05 MHZ, Zone 2 T118 outputs a complete set of operating data

IZONE 05IITID 55IIFM10005IIPRESET 02IITUNING AUTOIIMODE STEREOIIZONE 02IIIR

1IIPOWER ONI

02_10_11_2 Simply output "21" in ASCII if the current preset listening is 21

00_10_15_888_12 Program T118 Zone ID TO 12

00_10_15_222 Read Zone ID

Notes for Programming:

Each time after sending a command to operate a T118, always pause for 0.5 sec then send

command 11 to receive the update data feedbacks from the T118.

Pin Layout

RJ45 DB9-Male DB9-Female

Circuit Item

Pin 1 3 2

Pin 2 2 3

Pin 4 5 5

GND

CN12