HDMI1X4 User Manual www.xantech.
INTRODUCTION Congratulations on your purchase of the HDMI1X4 Splitter. The HDMI1X4 Splitter allows easy distribution of HDTV devices, using up to four HDTV displays. The line offers solutions for Home Theater, AV installation, data center, information distribution, conference room presentation, school and corporate training environments. The HDMI1X4 Splitter allows one HDTV HDMI device to be distributed easily in to four HDTV HDMI compatible monitors or projectors.
INSTRUCTIONS 1) Connect the supplied cable from the HDTV HDMI sources into the 1x4 HDMI Splitter input. HDMI to HDMI cable for HDMI source or HDMI to DVI cable for DVI source. 2) Connect the cables from your displays (monitor or projector) into the HDMI outs of the 1x4 HDMI Splitter. 3) Plug the 5VDC power supply into the 1x4 HDMI Splitter. DIP SWITCH GUIDELINES Inside the HDMI1X4 is a bank of Dip Switches. Below is a table describing their functions. By default, all switches are set to the Off position.
SPECIFICATIONS Video Amplifier Bandwidth Input Video Signal Input DDC Signal Single Link Range Input Connector Type Output Connector Type Power Consumption Power Supply Dimensions Shipping Weight 1.65 Gbps 1.2 volts p-p 5 volts p-p (TTL) 1080p / 1920 x 1200 HDMI Type A 19 pin female HDMI Type A 19 pin female 10 Watts (max.) 5V DC 12”W x 1.25”H x 4.125”D 5 lbs. Technical Support Hours: 7AM-5PM Pacific Phone: 800.843.5465 press 2 for Tech Support Fax: 800.492.6832 email: tech@xantech.
