Owner's Manual
xantech
ITEM
C:
(4) 283D Designer Emitters
ITEM
D:
(1)
781
ERGPS Power Supply
! '
STEP
1:
Plug in the
2.1
mm Coaxial power plug
of
the
781
ERGPS Power Supply (ITEM
0)
into the
jack
labeled 12VDC on the 789-44 Connecting Block (ITEM
8).
Plug the AC end
of
the
781
ERG PS Power Supply (ITEM D) into a 'un-
switched' 120V
AC
Line outlet.
STEP
2:
Connect the 3.5mm stereo mini plug from the
481
D IR Receiver (ITEM
A)
to
the 'IR RCVR' input located on the 789-44 Connecting Block (ITEM
8).
The
RED
connector connects to the
RED
receptacle.
6