Owner's Manual

xantech
LOCAL SYSTEM APPLICATION
Another application is to locate the IR receiver in a central location, such as
the TV, video screen and/or a speaker. The audio/video equipment can then
be hidden inside a cabinet or located away from the front of a room. This will
give the end-user the ability to direct a remote control to one central location
and not have to worry about aiming to the respective device to be controlled.
DL Series
IR Receiver
!
I
-
Hand Held
Remote
IR Photodiode
(mounted on or
near cabinet in an
inconspicuous
location) .
Controlled Equipment
_./'
(mounted behind
closed cabinet doors)
,-----------------------------,
7 Foot Ribbon
Gable with Quick
Connect Mini Plug
781ERGPS
(unswitched)
791-44
Amplified
Connecting Block
o 0
~ ..
+12 VDC
GND
STATUS
IR IN
~
I i~~
~ :t::
C> C
.. l!I
~
8
0
Satellite Receiver
=•it
'-----------------------------
The IR receiver is in close proximity to the audio/video equipment, no wiring
extension should be required so long as the connecting block is within reach
of the ?-foot cable. The 3.5mm stereo type mini plug is connected to the "IR
RCVR" jack on the Xantech Connecting Block.
PLACEMENT
The IR receiver should be located so that it is not directly facing a light source
such as lamps or displays (standard, LCD, and Plasma). When mounted near
a display, it should be flush to the display and away from light reflections that
may occur.
4