Owner's Manual
xantech
DESCRIPTION
These small
lR
receivers have been designed for mounting
in
very small
spaces. They may be mounted under shelf edges, cabinet ledges, in wall
speakers, etc. - anywhere an inconspicuous appearance is desired. The high
sensitivity
of
these receivers allows placement behind speaker grilles and still
receive IR commands up to 80 feet away*.
FEATURES
• Wire channel for clean installation.
• System testing red-talk-back LED.
• Includes 789-44 connecting block, power supply, and four 283D emitters
for easy system installation.
SPECIFICATIONS
• Infrared carrier frequency bandwidth:
25
- 60 kHz.
• Reception range: Up to 80 feet.*
• Reception angle: +/- 60 degrees.
• Cable requirements: See "INSTALLATION" below.
• Max. Transmission length: 1 mile using 18 gauge wire.
• Maximum current output: 1 00mA.
• Drives IR emitters through Xantech Connecting Blocks, Controllers, etc.
• Dimensions: 2.55" x 0.55" x 0.35" (65mm x 14mm x 9mm).
• Power requirements: +12VDC, 10mA.
* Depending on remote control output strength and ambient conditions.
MOUNTING
The IR receiver can be mounted to any flat surface, using the two-sided
adhesive tape supplied.
An additional feature is a wire channel on the rear
of
the surface mount IR
receiver. This will give the installer the ability to provide clean wire dressing
in
any direction.