Owner's Manual

INSTALLATION SETUP #2
Expanded Multi-Room Controller
The setup below shows two MRAUDIO4X4 Controllers connected in
Expansion mode. Expansion mode doubles the number of zones while
using the same number of sources. The benefit of the 283TPD is that you
only need to place one emitter at each source. One mono plug is
connected to the ‘master’ controller. The other mono plug is connected to
the ‘slave’ controller. This application can apply to the entire product line of
Xantech controllers.
MRAUOl04X4CTL or BXAUOl04X4CTL (master)
MRAUOl04X4CTL or BXAUOI04X4CTL (slave)