Manual

XAircraft MiniX OSD User Manual

Parameters

Input

Vol.

Video Input

Video

Output

Dimension

Weight

4.8~6V

1 Chn. Input

1Chn.Output

32.7mm x 18.8mm x 9.3mm

4.3

(not including cables)

Wiring

Port

Interface Type

Description

FC Port

4Pin Cable

Connect to FC

AVIN/AV OUT

4Pin OSD Cable

Connect to video transmitter and Camera

PAGE 1
XAircraft MiniX OSD User Manual Parameters Input Vol. 4.8~6V Video Input 1 Chn. Input Video Output 1Chn.Output Dimension 32.7mm x 18.8mm x 9.3mm Weight 4.
PAGE 2
Appendix 1: OSD Diagram on Screen 1. Number of Satellite: The number of satellite that GPS has picked up. There are 10 satellites in the diagram. 2. Battery Voltage: The voltage of battery. The diagram shows that the battery voltage is 14.3V. 3. Horizontal Velocity: The present velocity is 0.1m/s in the diagram. 4. Flight Mode: It may show M-Manual Mode, A-Attitude Mode, S-Safe Mode, G- GPS Attitude Mode or W-Waypoint Mode. The present status is GPS Mode in the diagram. 5.
PAGE 3
Appendix 2: Setting OSD in Configuration Software  System: choose corresponding video system according to your camera equipment.  Attitude Line Style   FPV Style: For the first-person view, the horizon on the screen refers to the real horizon.  Gimbal Style: The horizon on the screen reflects the attitude angle of aircraft. Low Battery Alarm: When the battery voltage is lower than configured voltage, OSD raises the alarm.
PAGE 4
support@xaircraft.com http://www.xaircraft.com Guangzhou JiFei Electronics Technology Co., Ltd (XAircraft) has the final power of interpretation on this manual.