Instruction Manual

Mounting to the Windshield

NOTE! Use only the appropriate XACT accessories or input devices with your receiver. Use only the 12v Vehicle

Adapter that is provided with the kit. It is important that you do not modify it in any way since this will result

in damaging your equipment and void the warranty.

1. Insert the 4 suction cups into

the larger side of the holes

on the Visor Vehicle

Mounting Bracket and slide

outward to lock in place.

(figure 1).

2. Loosen the thumb screw and

rotate the Visor Mounting tab

to the appropriate angle for

your vehicle’s windshield.

Tighten the thumb screw.

(figure 2).

3. Slide the XACT Visor

Sirius Satellite Radio

Receiver onto the mounting

tab of the Visor Vehicle

Mount until it locks into place.

(figure 3). To remove the

XACT Visor Sirius Satellite

Radio Receiver, push the

locking tab on the bottom of

the Visor inward and slide

forward.

4. Place the suction cups on the

Visor Vehicle Mount in an

appropriate location on your

windshield. Press firmly to

secure the Visor in place.

(figure 4).

5. Connect the DC Power,

antenna and audio (if

required) to the appropriate

jacks. (figure 5).

INSTALLATION