Installation Guide

5. MOUNT THE STAND ON THE COUNTERTOP
Choose your preferred method of attaching the stand to the countertop.
METHOD #1: USING ADHESIVE STICKER
Remove the white protectivesticker cover under the base as Figure 9 and press the base firmly
to the countertop. (Note: The countertop should be wiped with detergent before using sticker)
METHOD #2: USING THE SCREWS
Use 2*M3 screws to mount stand on the countertop from bottom of countertop through screw
hole as Figure 10. (Note: refer tocountertop hole as Figure 11, screws lengths reference:4mm +
countertop thickness)
Figure 9Figure 10Figure 11
6. CONNECT WITH XCL_AT-170
Place xCL_AT-170 on the XC70 for charging and as Figure 12 and Figure 13.
Figure 12Figure 13
Unit: mm